Please wait a minute...
工程设计学报
Chinese Journal of Engineering Design  2015, Vol. 22 Issue (3): 224-229    DOI: 10.3785/j.issn. 1006-754X.2015.03.004
    
Robust optimization design of flexible hinge flexibility based on Taguchi method
WU Jian-jun， WAN Liang-qi， WU Shi-liang， NIE Peng-fei， WU Jia-wei
School of Mechanical and Electrical Engineering， Jiangxi University of Science and Technology, Ganzhou 341000， China）
Download: HTML     PDF(888KB)
Export: BibTeX | EndNote (RIS)      

Abstract  The flexibility robustness of compliant mechanism is the premise of compliant mechanism widely applying in miniature electromechanical systems and precise engineering field. In practice, this problem cannot be solved by using traditional method. A new robust design method was presented, the structural parameters of flexure hinge and working load were selected as well. By processing and analyzing test data resulted from orthogonal test, the best combination of parameters was obtained and verified by experiment. The results demonstrated that, against the traditional design, the signal noise ratio increased about 4.68 dB, the quantity loss of flexible hinge reduced. It also implemented the flexibility stability optimization on the flexible hinge. Finally, the flexibility robustness of flexible hinge could be optimized. The robust design can be widely used and has reference value in application.

Key words： compliant mechanism      Taguchi method      robust optimization     
Received: 12 November 2014      Published: 28 June 2015
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
Cite this article:

WU Jian-jun， WAN Liang-qi， WU Shi-liang， NIE Peng-fei， WU Jia-wei. Robust optimization design of flexible hinge flexibility based on Taguchi method. Chinese Journal of Engineering Design, 2015, 22(3): 224-229.

URL:

https://www.zjujournals.com/gcsjxb/10.3785/j.issn. 1006-754X.2015.03.004     OR     https://www.zjujournals.com/gcsjxb/Y2015/V22/I3/224


基于田口方法的柔性铰链柔度稳健优化设计

柔顺机构柔度稳健性是柔性机构在微机电系统与精密工程等领域广泛应用的前提和基础，但在实际工程中传统设计方法未充分考虑其稳健性.引入田口稳健优化设计方法，选取柔性铰链各结构参数为可控因素，工作载荷为噪声因子，通过正交试验数据分析得出各个可控因素的信噪比和贡献率，进而选出最佳的参数水平组合，并对柔度综合稳健性能的最优方案进行了验证．算例表明，采用田口稳健优化设计的柔性铰链柔度稳健性比传统方法信噪比水平提高了4.68 dB，降低了其质量损失，实现了柔性铰链柔度稳定性优化．田口稳健优化设计方法具有普适性，在实际工程应用中具有较高参考价值．

关键词： 柔顺机构,  田口方法,  稳健优化 
[1] KONG Chui-wang, CHEN Wei-lin, LU Qing-hua, LUO Lu-feng, ZHANG Yun-zhi. Nonlinear modeling and optimization of single-stage compliant orthogonal displacement amplification mechanism[J]. Chinese Journal of Engineering Design, 2020, 27(1): 76-86.
[2] HU Jun-feng, HAO Ya-zhou, ZHENG Chang-hu. Robust optimization design of a precise micromanipulation stage for reducing temperature effect[J]. Chinese Journal of Engineering Design, 2015, 22(6): 581-588.
[3] SUN Kai, BO Rui-feng, LU Jian-peng, LI Rui-qin. Multi-objective topology optimization of design compliant mechanisms based on global strain[J]. Chinese Journal of Engineering Design, 2015, 22(6): 575-580.
[4] LIU Ren-Yun, YU Fan-Hua, ZHANG Yi-Min. Reliability-based robust optimization design for torsion bar with multi-objective decision-making[J]. Chinese Journal of Engineering Design, 2010, 17(3): 181-185.
[5] ZHOU Sheng-Qiang, XIANG Jin-Wu. Multi-objective robust optimization method to
aircraft conceptual design[J]. Chinese Journal of Engineering Design, 2006, 13(6): 426-430.